PULSE AND DIGITAL CIRCUITS
- 1. The capacitor which totally blocks D.C not allowing it to reach output is called Blocking Capacitor
- 2. The magnitude of the ratio of output to input called Transfer Function
- 3. The average level of the output signal is always zero, under Steady State
- 4. Critical Resistance is the value of resistance which reduces square root term to zero
- 5. Damping Ratio is the indication of the opposition from the circuit to cause oscillations in its response
- 6. The Clipper Circuits are used to remove the unwanted portion
- 7. The forward resistance of diode is small and cut-in voltage is also small, the diode is assumed to be an Ideal Diode
- 8. The diode with pieces of straight lines, the name given to such approximation is PieceWise-Linear method
- 9. If there are two clipping levels they are known as Double Ended Clipper
- 10. When a transistor used as Switch , it is usually made to operate alternately
- 11. The Bistable Multi-Vibrators is used to drive the other circuits
- 12. The waveform at the emitters is more important in the Monoshot
- 13. The time required for the return to the initial value is called the Restoration Time
- 14. Sampling gate is also referred to as Transmission Gate
- 15. Sampling gate may be broadly classified as Uni-Directional or Bi-Directional
0 comments:
Post a Comment